224
4-2. Driving procedures
Turn signal lever
Operating instructions
The turn signal lever can be used to show the following intentions of
the driver:
Right turn
1
Lane change to the right (push
2
and hold the lever partway)
The right hand signals will flash
until you release the lever.
Lane change to the left (push
3
and hold the lever partway)
The left hand signals will flash until
you release the lever.
Left turn
4
■
Turn signals can be operated when
The engine switch is in IGNITION ON mode.
■
If the indicator flashes faster than usual
Check that a light bulb in the front or rear turn signal lights has not burned
out.
LC200_OM_OM60T03U_(U)