Table of Contents
Advertisement
364
4-5. Using the driving support systems
Multi-information display
1
The BSM function/RCTA function can be turned on/off. (P. 365)
The RCTA function is available when the BSM function is on.
Outside rear view mirror indicator
2
BSM function:
When a vehicle is detected in a blind spot of the outside rear view mirrors
or approaching rapidly from behind into a blind spot, the outside rear view
mirror indicator on the detected side will illuminate. If the turn signal lever
is operated toward the detected side, the outside rear view mirror indicator
will flash.
RCTA function:
When a vehicle approaching from the right or left rear of the vehicle is
detected, the outside rear view mirror indicators flash.
"BSM" indicator/"RCTA" indicator
3
When the BSM function/RCTA function is turned on, the indicator illumi-
nates
Monitor screen display (RCTA function only)
4
If a vehicle approaching from the right or left at the rear of the vehicle is
detected, the RCTA icon (P. 372) for the detected side will be displayed
on the monitor screen. This illustration shows an example of a vehicle
approaching from the left at the rear of the vehicle.
RCTA buzzer (RCTA function only)
5
If a vehicle approaching from the right or left at the rear of the vehicle is
detected, a buzzer will sound. The buzzer also sounds for approximately 1
second immediately after the BSM function is operated to turn the system
on.
LC200_OM_OM60T03U_(U)
Advertisement
Table of Contents
