Toyota Land Cruiser 200 2021 Manual page 318

318
4-5. Using the driving support systems
Switch operations
■
On some screens, the display mode or display settings can be
changed using the switches.
● Automatic display mode switch
When automatic display mode is turned on, the Multi-terrain
Monitor screen is displayed in the following conditions, even if
the VIEW switch has not been operated.
• The shift lever is shifted to D or N
• While driving, the vehicle speed drops to approximately 6 mph
(10 km/h) or less (except when the shift lever is in R)
The automatic display mode
switches between on and off
each
selected.
When
mode is on, an indicator illu-
minates on the icon.
Even when automatic display
mode is on, the display can
still be switched by pressing
the VIEW switch.
● Display selection switches
The following switches can be pressed or selected to switch the
Multi-terrain Monitor display screen and to switch from normal to
wide view display.
VIEW switch
Angle mode
selection switch
Under vehicle
terrain view
selection switch
LC200_OM_OM60T03U_(U)
time is
automatic display
Switch
Indicator
Switch Function
Changing a display (P. 319)
Switches between the wide rear view
and rear view display (P. 328, 335)
Switches between the front view and
under vehicle terrain view
(P. 322, 326)