72
1-2. Child safety
Child restraint system fixed with a child restraint LATCH anchor
Child restraint LATCH anchors
■
LATCH anchors are provided
for the second outboard seats.
(Buttons displaying the location
of the anchors are attached to
the seats.)
When installing in the second outboard seats
■
Install the child restraint system in accordance to the operation
manual enclosed with the child restraint system.
Adjust the seat
1
If there is a gap between the child seat and the seatback, adjust the
seatback angle until good contact is achieved.
If the head restraint interferes with the child restraint system
2
installation and the head restraint can be removed, remove the
head restraint. (P. 158)
Take off the covers between
3
the seat cushion and seat-
back, then confirm the posi-
tion of the LATCH anchors
below the symbol in the seat-
back.
LC200_OM_OM60T03U_(U)