Changing engine switch modes
Modes can be changed by pressing the engine switch with brake
pedal released. (The mode changes each time the switch is pressed.)
*
Off
1
The emergency flashers can be
used.
ACCESSORY mode
2
Some electrical components such
as the audio system can be used.
"ACCESSORY" will be displayed
on the multi-information display.
IGNITION ON mode
3
All electrical components can be
used.
"IGNITION ON" will be displayed
on the multi-information display.
*
: If the shift lever is in a position
other than P when turning off the
engine, the engine switch will be
turned to ACCESSORY mode, not
to OFF.
LC200_OM_OM60T03U_(U)
4-2. Driving procedures
213
4