Table of Contents
Advertisement
NOTICE
■
Back door damper stays
The back door is equipped with damper stays that hold the back door in
place.
Observe the following precautions.
Failure to do so may cause damage to the back door damper stay, resulting
in malfunction.
●
Do not attach any foreign objects, such
as stickers, plastic sheets, or adhesives
to the damper stay rod.
●
Do not touch the damper stay rod with
gloves or other fabric items.
●
Do not attach any accessories other
than genuine Toyota parts to the back
door.
●
Do not place your hand on the damper stay or apply lateral forces to it.
■
To prevent back door closer malfunction (vehicles with power back
door)
Do not apply excessive force to the back door while the back door closer is
operating.
■
To prevent damage to the power back door (if equipped)
●
Make sure that there is no ice between the back door and frame that
would prevent movement of the back door. Operating the power back door
when excessive load is present on the back door may cause a malfunc-
tion.
●
Do not apply excessive force to the back door while the power back door
is operating.
●
Take care not to damage the sensors (installed on the right and left edges
of the power back door) with a knife or other sharp object. If the sensor is
disconnected, the power back door will not operate in automatic operation.
■
When operating the back door reserve lock function (vehicles with
power back door)
Make sure to carry the electronic key on your person.
If the electronic key is returned inside the vehicle during the closing opera-
tion, it may be locked even if the electronic key is inside the vehicle depend-
ing on the location of electronic key.
Before leaving the vehicle, make sure that all the doors are closed and
locked.
LC200_OM_OM60T03U_(U)
3-2. Opening, closing and locking the doors
Damper stay
137
3
Advertisement
Table of Contents
