Table of Contents
Advertisement
166
3-4. Adjusting the steering wheel and mirrors
Setting automatic mode
■
The door mirrors can be automatically folded and extended by link-
ing them to the lock and unlock operations of the smart key system
and wireless remote control. They can also be extended by turning
the engine switch to IGNITION ON mode.
Put the switch in the neutral
position
Linked mirror function when reversing
When the mirror select switch is in the L or R position, the outside rear
view mirrors will automatically angle downwards when the vehicle is
reversing in order to give a better view of the ground.
To disable this function, move the mirror select switch to the neutral
position (between L and R).
Adjusting the mirror angle when the vehicle is reversing
■
With the shift lever in R, adjust the mirror angle at a desired posi-
tion. The adjusted angle will be memorized and the mirror will auto-
matically tilt to the memorized angle whenever the shift lever is
shifted to R from next time.
The memorized downward tilt position of the mirror is linked to the nor-
mal position (angle adjusted with the shift lever in other than R). There-
fore, if the normal position is changed after adjustment, the tilt position
will also change.
When the normal position is changed, readjust the angle in reversing.
LC200_OM_OM60T03U_(U)
Advertisement
Table of Contents
