Switching modes
Operate the Multi-terrain Select
mode select switch during Multi-
terrain Select control to select a
mode.
Once the mode is confirmed, the
mode name will be displayed and
the control will switch.
■
Automatic system cancelation
In the following situations, the Multi-terrain Select indicator will go off, and
Multi-terrain Select will be canceled automatically
●
When the four-wheel drive control switch is in H4.
●
When Active TRAC and VSC are off.
■
When it is difficult to generate traction
MUD & SAND mode provides the largest amount of tire slippage, followed by
LOOSE ROCK, MOGUL, ROCK & DIRT and ROCK mode.
Drivability can be improved by selecting a mode which provides a smaller
amount of tire slippage than the current mode when the amount of tire slip-
page is large, or conversely selecting a mode which provides a larger amount
of tire slippage than the current mode when the amount of tire slippage is
small.
■
When the vehicle is stuck
Switching the transfer and differential
For the operation of the following functions, refer to the following pages.
●
Four-wheel drive system (P. 300)
●
Center differential lock (P. 301)
LC200_OM_OM60T03U_(U)
4-5. Using the driving support systems
311
4