Table of Contents
Advertisement
356
4-5. Using the driving support systems
● Projected course lines
Projected course lines are displayed under the assumption that
the vehicle is on a flat road surface. Therefore, the position of
three-dimensional objects higher than the road surface (such as
a vehicle bumper) cannot be determined. Even if it seems that an
obstacle is outside of the projected course lines and a collision
will not occur according to the screen, an obstacle may actually
be in the vehicle course, resulting in a collision.
Projected course lines
1
Three-dimensional objects in high positions (such as walls with
protrusions or the loading areas of trucks) may not be displayed
on the screen. Confirm the safety of your surroundings directly.
Protrusion of a wall
1
LC200_OM_OM60T03U_(U)
Advertisement
Table of Contents
