Driving Procedures; Engine (Ignition) Switch - Toyota Land Cruiser 200 2021 Manual

Engine (ignition) switch

Performing the following operations when carrying the elec-
tronic key on your person starts the engine or changes engine
switch modes.
Starting the engine
Check that the parking brake is set.
1
Check that the shift lever is set in P.
2
Firmly depress the brake pedal.
3
and a message will be displayed on the multi-information display.
If it is not displayed, the engine cannot be started.
Press the engine switch shortly
4
and firmly.
When operating the engine switch,
one short, firm press is enough.
It is not necessary to press and
hold the switch.
The engine will crank until it starts
or for up to 30 seconds, whichever
is less.
Continue depressing the brake
pedal until the engine is completely
started.
The engine can be started from
any engine switch mode.
LC200_OM_OM60T03U_(U)

4-2. Driving procedures

211
4