Table of Contents
Advertisement
Assembling the jack handle.
3
Remove the jack handle, jack extension bar and jack handle bar
from the tool box and assemble by following these steps.
Loosen the bolt and the screw
using either the jack handle end
or a screwdriver.
Assemble
extension bar and the jack han-
dle bar and tighten the bolts.
Check that the bolts are firmly
tightened.
Assemble
extension bar and the jack han-
dle and tighten the screw.
Check that the screw is firmly
tightened.
LC200_OM_OM60T03U_(U)
7-2. Steps to take in an emergency
the
jack
handle
the
jack
handle
551
7
Advertisement
Table of Contents
