Configuration Tools And Interfaces; Overview; Pre-Requisites; Application Design, Installation, Startup, And Operation - Honeywell SmartLine Multivariable SMV800 Series User Manual

3 Configuration Tools and Interfaces

Overview

This section describes the tools and interfaces involved in configuring a new SMV800 SmartLine
Multivariable Transmitter for HART or DE communication operation. The information in this section
also applies to adjusting the configuration of a Transmitter that has been in operation and updating
one that is currently in operation.

Pre-requisites

The information and procedures in this manual are based on the assumption that personnel
performing configuration and calibration tasks are fully qualified and knowledgeable in the use of the
Honeywell MC Toolkit or MCT202/MCT404 and the PC tool SCT3000 application.
Furthermore, we assume that the reader is intimately familiar with the SMV800 family of SmartLine
Multivariable Transmitters and thoroughly experienced in the type of process application targeted for
Transmitter deployment. Therefore, detailed procedures are supplied only in so far as necessary to
ensure satisfactory completion of configuration tasks.

Application Design, Installation, Startup, and Operation

The SMV800 SmartLine Multivariable Transmitters User's Manual, document number 34-SM-25-03,
provides the details for application design, installation, and startup; see
SMV800 SmartLine Multivariable Transmitters User's Manual, 34-SM-25-03
Section 2. Application Design
Safety
Accuracy
Diagnostics messages
Other sections include but not limited to: Section 5. Maintenance, Section 6. Calibration, Section 7
Troubleshooting, Section 8. Parts List, Appendix. Certificates, Security Vulnerability

Organization

This information in this section is arranged in the following sequence:

MCT404 Toolkit operation in SMV800 Transmitter HART Setup and Configuration:
o Physical circuit connections
o Application components
o Configuration for Analog and HART operation

SCT3000 operation in SMV800 Transmitter DE Setup and Configuration:
o Physical circuit connections
o Application components
o Configuration for DE operation
Revision 6.0
Table 3 – User Manual Related Topics
Section 3. Installation and Startup
Site evaluation, Toolkit issues
Display installation concerns,
Transmitter mounting, Piping &
wiring, Startup tasks and procedures
SMV800 Series HART/DE Option User's Manual
Table 3 for topics.
Section 4. Operation
Three-button option
Failsafe direction setup
Monitoring displays
Page 11