Honeywell SmartLine Multivariable SMV800 Series User Manual page 81

Differential
Pressure
Pressure
Revision 6.0
DP Unit
DP Value
DP UTL
DP URL
DP URV
DP LRV
DP LRL
DP LTL
DP Damp
SMV800 Series HART/DE Option User's Manual
O
● inH2O (68 F)
inHg (0 O C)
●
● ftH2O (68 O F)
O
● mmH2O (68 F)
● mmHg (0 O C)
● psi
● bar
● mbar
g/cm2
●
● kg/cm2
Pa
●
● kPa
● Torr
● Atm
inH2O@60 O F
●
● MPa
O
● inH2O@4 C (39.2
O
● mmH2O@4 C (39.2
The current value of the Differential Pressure
input
The Upper Transducer Limit for the Differential
Pressure input
The Upper Range Limit for the Differential
Pressure input
The Upper Range Value for the Differential
Pressure input (which represents 100%
output) in user selected engineering units.
This value may be configured to any value
within the range DP LTL to DP UTL.
The Lower Range Value for the Differential
Pressure input (which represents 0% output)
in user selected engineering units. This value
may be configured to any value within the
range DP LTL to DP UTL.
The Lower Range Limit for the Differential
Pressure input
The Lower Transducer Limit for the Differential
Pressure input
Damping value for the Differential Pressure
output. Entries may be any value from 0.00 to
32.00 seconds.
O
F
O
F)
Page 69