Flowconf Configuration - Pv4; Table 12- Pre-Programmed Volumetric Flow Engineering Units For Pv4 - Honeywell SmartLine Multivariable SMV800 Series User Manual

FlowConf Configuration - PV4

Engineering Units
The FlowConf tab card displays the Lower Range Value (LRV), Lower Range Limit (LRL), Upper
Range Value (URV) and Upper Range Limit (URL) for PV4 in the unit of measure selected in the
Engineering Units field.
PV4 Engineering Units
Select one of the preprogrammed engineering units for display of the PV4 measurements, depending
upon type of flow measurement configuration.
for volumetric flow and Table 13 lists the engineering units for mass flow.

Table 12- Pre-programmed Volumetric Flow Engineering Units for PV4

Engineering Unit
d Factory setting.
Page 36
Table 12
3 d
M /h
gal/h
l/h
cc/h
3
m /min
gal/min
l/min
cc/min
3
m /day
gal/day
Kgal/day
bbl/day
3
m /sec
CFM
CFH
SMV800 Series HART/DE Option User's Manual
lists the pre-programmed engineering units
Meaning
Cubic Meters per Hour
Gallons per Hour
Liters per Hour
Cubic Centimeters per Hour
Cubic Meters per Minute
Gallons per Minute
Liters per Minute
Cubic Centimeters per Minute
Cubic Meters per Day
Gallons per Day
Kilogallons per Day
Barrels per Day
Cubic Meters per Second
Cubic Feet per Minute
Cubic Feet per Hour
Revision 6.0