Honeywell SmartLine Multivariable SMV800 Series User Manual page 78

Key: Plain = Read only Bold = Configurable Bold underline = Method Bold italic = Table or graph
Pages Group
General
Device Info
Software
Details
Page 66
Table 20 - Configuration Menu
Configuration parameters
Parameter
Tag
Long Tag
Descriptor
MB Install Date
Temp module
Install Date
Sensor install date
Polling address
Message
Universal Rev
Field Device rev
Software Rev
DD Revision
Dev SW Rev
Pressure module
SW Rev
Temp module SW
Rev
Display module Rev
SMV800 Series HART/DE Option User's Manual
Description
Enter Tag ID name up to 8 characters
Enter Tag ID name up to 32 characters
Enter any desired or useful descriptor of the
transmitter.
(One time editable) Transmitter installation date in
MM/DD/YYYY format.
Note: If install date is not
(One time editable) Temperature Module
installation date in MM/DD/YYYY format.
Note: If install date is not
The customer-entered Temperature Sensor Install
Date. Editable
Poll Address: Select HART short address 0 to 63
Enter a message up to 32 alphanumeric
characters) that will be sent to the Display. The
message will be shown on the Display
interspersed with the configured screens.
HART Protocol Universal Revision (HART 7)
Displays Field Device Revision of the SMV800
Transmitter
HART software revision
Device descriptor revision
Device firmware revision (Communication module
firmware revision)
Pressure module firmware revision
Temperature module firmware revision
Display module firmware revisions
Revision 6.0