Configuration Tools And Interfaces; Overview; Pre-Requisites; Application Design, Installation, Startup, And Operation - Honeywell ST 800 Series User Manual

3 Configuration Tools and Interfaces

3.1 Overview

This section describes the tools and interfaces involved in configuring a new ST 800 SmartLine
Pressure Transmitter for HART or DE communication operation. The information in this section also
applies to adjusting the configuration of a Transmitter that has been in operation and updating one
that is currently in operation.

3.2 Pre-requisites

The information and procedures in this manual are based on the assumption that personnel
performing configuration and calibration tasks are fully qualified and knowledgeable in the use of the
Honeywell MC Toolkit or MCT202. The name MC Toolkit or Toolkit and MCT202 are used
interchangeably as MCT202 is the model name for the Honeywell MC Toolkit product. Furthermore,
we assume that the reader is intimately familiar with the ST 800 family of SmartLine Pressure
Transmitters and thoroughly experienced in the type of process application targeted for Transmitter
deployment. Therefore, detailed procedures are supplied only in so far as necessary to ensure
satisfactory completion of configuration tasks.

3.3 Application Design, Installation, Startup, and Operation

The ST 800 SmartLine Pressure Transmitters User's Manual, document number 34-ST-25-35,
provides the details for application design, installation, and startup; see Table 3 for topics.
ST 800 SmartLine Pressure Transmitters Users Manual
Section 2. Application Design
Safety and accuracy
Diagnostics messages
Design consideration

Organization

This information in this section is arranged in the following sequence:
•
MC Toolkit participation in ST 800 Transmitter Setup and Configuration:
o Physical circuit connections
o Application components
o Configuration for Analog, DE, and HART operation
•
ST 800 Transmitter
o Basic and advanced displays
o Health indications
o
Ability to be configured and operate in a process system
Page 8
Table 3 – User Manual Related Topics
Section 3. Installation and Startup
Site evaluation
Toolkit issues
Display installation concerns
Transmitter mounting &
zero-correction
Piping & wiring
Startup tasks and
procedures
ST 800 Series HART/DE Option User's Manual
Section 4. Operation
Three-button
option
Failsafe direction
setup
Monitoring
displays
Revision 5.0