Honeywell SmartLine Multivariable SMV800 Series User Manual page 117

Page Group
Process/
Other
Other
Variables
Variable
PV Meter
SV Meter
Process TV Meter
Variables QV Meter
Gauges
MBT Meter
AO Meter
ET Meter
Device Health
Critical Faults
Device
Status
Non-Critical
Faults
Refer Table 31 Device Status and "Troubleshooting and Maintenance" for more details on
individual status details in each group: Critical, Non-critical and Additional Status
Revision 6.0
Parameter
PV % rnge
Loop current
Comm module Temp
CJT Value
Positive Totalizer
Negative Totalizer
Trend Charts
PV value
SV value
TV value
QV value
MBT value
AO value
ET value
Additional Status
SMV800 Series HART/DE Option User's Manual
Description
The percentage value representation of
the device output based on the
configured Process Variable range
(LRV to URV)
Displays the current value of the
analog output current in milliamperes
Communication module temperature
Cold junction temperature value
This is the Totalized Flow for Forward
flow only. The Positive Totalizer will
increment when the Flow Rate is a
forward flow (positive flow value).
This is the Totalized Flow for Reverse
flow only. The Negative Totalizer will
decrement when the Flow Rate is a
reverse flow (negative flow value). Note
that the Reverse Flow configuration
setting must be enabled to calculate
negative flow.
Process value shown in a gauge
Process value shown in a gauge
Process value shown in a gauge
Process value shown in a gauge
Process value shown in a gauge
Process value shown in a gauge
Process value shown in a gauge
Shows the overall health of the device
as Normal, Warning or Failure
Shows any critical faults that are
currently active. If there are no critical
faults, this menu will show "None"
Shows any Non-critical faults that are
currently active. If there are no Non-
critical faults, this menu will show
"None"
Shows additional status details for any
of the Critical or Non-critical faults. If
there are no Critical or Non-critical fault
Page 105