Honeywell SmartLine Multivariable SMV800 Series User Manual page 249

Meter Body
Meter Body
Comm
Temp Sensor Sensor Critical
Board Failure
Temp Input
Temp Sensor
Comm
Revision 6.0
Pressure:
Meter Body Failure
Sensor Charact
Corrupt
Suspect Input
Sensor RAM Corrupt
Sensor Code Corrupt
Sensor Flow Failure
Sensor RAM DB
Failure
DP/MBT/SP/PT/Flow
Bad
SMV800 Series HART/DE Option User's Manual
Pressure module is reporting a critical
failure of the pressure sensing
measurement within the Meter Body,
which may be caused by one of the
following:

Meter body failure

Sensor communication timeout

Sensor firmware flow failure
.
Resolution:
Reset the device. If the problem persists,
replace the Meter Body.
Pressure module is reporting corruption in
the Pressure Characterization data
Resolution:
Reset the device. If the problem persists,
replace the Meter Body
Pressure, Meter Body Temperature and/or
Static Pressure input are extremely out of
range such that the value is suspect.
Resolution:
Verify that all inputs are within
specifications. Reset the device. If the
problem persists, replace the Meter Body.
Pressure module is reporting corruption in
the Random Access Memory (RAM)
Resolution:
Reset the device. If the problem persists,
replace the Meter Body
Pressure module is reporting corruption in
sensor firmware
Resolution:
Reset the device. If the problem persists,
replace the Meter body.
Pressure module is reporting corruption in
the processing code flow
Resolution:
Reset the device. If the problem persists,
replace the Meter body.
Pressure module is reporting corruption in
the database in the Random Access
Memory (RAM)
Resolution:
Reset the device. If the problem persists,
replace the Meter body.
One of process inputs to the device and/or
the flow calculation has failed. Refer to
other detailed status bits for more detail.
Resolution:
Refer to the additional detailed status bits
for resolution.
Page 237