Installation And Startup; Installation Site Evaluation; Honeywell Smartline Configuration Tools; Display Installation Precautions - Honeywell SMV800 SmartLine User Manual

3.1 Installation Site Evaluation

Evaluate the site selected for the SMV800 SmartLine Multivariable Transmitter installation with
respect to the process system design specifications and Honeywell's published performance
characteristics for your model. Some parameters that you may want to include in your site evaluation
are:
•
Environmental Conditions:
o Ambient Temperature
o Relative Humidity
•
Potential Noise Sources:
o Radio Frequency Interference (RFI)
o Electromagnetic Interference (EMI)
•
Vibration Sources
o Pumps
o Motorized System Devices (e.g., pumps)
o Valve Cavitation
•
Process Parameters
o Temperature
o Maximum Sensor Input Ratings

3.2 Honeywell SmartLine Configuration Tools

To use Honeywell Versatilis Modem and application software to configure HART and DE
transmitters, refer to Honeywell Versatilis Configurator Quick Start Guide, Document # 34-ST-25-69.
For Modbus refer to SMV800 SmartLine Multivariable Transmitter Modbus Communication Manual,
Document # 34-SM-25-09.
To configure Modbus transmitters use Honeywell's SmartLine Modbus Manager PC application.
https://process.honeywell.com/us/en/products/field-instruments/multivariable-transmitters/smartline-
smv800-multivariable-transmitter

3.3 Display Installation Precautions

Temperature extremes can affect display quality. The display can become unreadable at temperature
extremes; however, this is only a temporary condition. The display will again be readable when
temperatures return to within operable limits.
The display update rate may increase at cold temperature extremes, but as with readability, normal
updating resumes when temperatures are within limits for full operability.
Revision 10

3 Installation and Startup

SMV800 Transmitter User's Manual
Page 13