Damping
Adjust the damping time constant for Process Temperature (PV3) to reduce the output noise. We
suggest that you set the damping to the smallest value that is reasonable for the process.
The damping values (in seconds) for PV3 are:
Adjust the damping time to reduce the output noise. We recommend that you set the damping to the
largest value that the system can accept.
Revision 6.0
Figure 13 - Current Range Settings
d
0.00
, 0.3, 0.7, 1.5, 3.1, 6.3,
12.7, 25.5, 51.1, 102.3
SMV800 Series HART/DE Option User's Manual
Page 35