Honeywell SmartLine Multivariable SMV800 Series User Manual page 190

Group Parameter
KUser Manual
calculation Input
KUser KUser
calculation Value
Fluid
name/num. Fluid name
coefficients
Page 178
Values
ON/OFF
#.#
0,1,1,2,2-TETRAFLUOROETHANE,
1,1,1,2-TRICHLOROETHANE,
2,1,2,4-TRICHLOROBENZENE,
3,1,2-BUTADIENE,
4,1,3,5-TRICHLOROBENZENE,
5,1,4-DIOXANE,
6,1,4-HEXADIENE,
7,1-BUTANAL,
8,1-BUTANOL,
9,1-BUTENE,
10,1-DECANAL,
11,1-DECANOL,
12,1-DECENE,
13,1-DODECANOL,
14,1-DODECENE,
15,1-HEPTANOL,
16,1-HEPTENE,
17,1-HEXADECANOL,
18,1-HEXENE,
19,1-NONANAL,
20,1-NONANOL,
21,1-OCTANOL,
22,1-OCTENE,
23,1-PENTADECANOL,
24,1-PENTANOL,
25,1-PENTENE,
26,1-UNDECANOL,
27,2,2-DIMETHYLBUTANE,
SMV800 Series HART/DE Option User's Manual
Description
Select this to ON to enter
KUser value manually. Select
this to OFF to have DTM
auto calculate the KUser
value using selected Fluid
type, Flow output type, Max
Flow Rate and Max
Differential Pressure.
When Manual Input is ON,
user enters the KUser value
for ASME 1989 Algorithms.
When Manual Input is OFF,
KUser value is auto
calculated. When Algorithm
is Dynamic, Manual Input
ON/OF is not applicable and
this value is set to 1.
If Flow value or KUser value
calculates to NaN, make sure
the Nominal Temperature
Value is within the Lower
TempLimit Density TpMin
and Upper TempLimit
Density TpMax
List of Fluids for which the
Viscosity and Density
coefficients will be calculated
.
automatically
Revision 6.0