Sct 3000 On-Line Connections To The Smv; Table 4 - Making Sct 3000 Hardware Connections - Honeywell SmartLine Multivariable SMV800 Series User Manual

ATTENTION Connecting the host computer to an SMV for on-line communications requires
SmartLine Option Module consisting of a DE Modem connection.

SCT 3000 On-line Connections to the SMV

Table 4 provides the steps to connect the assembled SCT 3000 hardware between the host computer
and the SMV for on-line communications.
WARNING
When the transmitter's end-cap is removed, the housing is not explosion proof.

Table 4 - Making SCT 3000 Hardware Connections

Step
1 With the power to the host computer turned off.
2 Remove the end-cap at the terminal block side of the SMV and
connect the easy hooks or alligator clips at the end of the adapter
cable to the respective terminals on the SMV as follows:
•
•
ATTENTION! The SCT 3000 can be connected to only one SMV at a time.
Revision 6.0
-- TMB-240 Single Slot Internal Front Panel Adapter
-- TM50 Dual Slot Internal Front Panel Adapter
-- GS-120 Greystone Peripherals, Inc.
-- GS-320 Greystone Peripherals, Inc.
Connect the red lead to the positive terminal.
Connect the black lead to the negative terminal.
SMV800 Series HART/DE Option User's Manual
Action
Page 17