Configuration Tools And Interfaces; Overview; Pre-Requisites; Application Design, Installation, Startup, And Operation - Honeywell STT850 Series User Manual

3 Configuration Tools and Interfaces

3.1 Overview

This section describes the tools and interfaces involved in configuring a new STT850 SmartLine
Temperature Transmitter for HART or DE communication operation. The information in this section
also applies to adjusting the configuration of a Transmitter that has been in operation and updating
one that is currently in operation.

3.2 Pre-requisites

The information and procedures in this manual are based on the assumption that personnel
performing configuration and calibration tasks are fully qualified and knowledgeable in the use of the
Honeywell MC Toolkit or MCT404/202. The name MC Toolkit or Toolkit and MCT404/202 are used
interchangeably as MCT404/202 is the model name for the Honeywell MC Toolkit product.
Furthermore, we assume that the reader is intimately familiar with the STT850 family of SmartLine
Temperature Transmitters and thoroughly experienced in the type of process application targeted for
Transmitter deployment. Therefore, detailed procedures are supplied only in so far as necessary to
ensure satisfactory completion of configuration tasks.

3.3 Application Design, Installation, Startup, and Operation

The STT850 SmartLine Temperature Transmitters User's Manual, document number 34-ST-25-35,
provides the details for application design, installation, and startup; see Table 3 for topics.
STT850 SmartLine Temperature Transmitters Users Manual
Section 2. Application Design
Safety and accuracy
Diagnostics messages
Design consideration

3.3.1 Organization

This information in this section is arranged in the following sequence:

MC Toolkit participation in STT850 Transmitter Setup and Configuration:
o Physical circuit connections
o Application components
o Configuration for Analog, DE, and HART operation

STT850 Transmitter
o Basic and advanced displays
o Health indications
o
Ability to be configured and operate in a process system
Revision 4.0
Table 3 – User Manual Related Topics
Section 3. Installation and Startup
Site evaluation
Toolkit issues
Display installation concerns
Transmitter mounting & zero-
correction
Wiring
Startup tasks and procedures
STT850 Series HART/DE Option User's Manual
Section 4. Operation
Three-button option
Failsafe direction setup
Monitoring displays
Page 9