Honeywell SmartLine Multivariable SMV800 Series User Manual page 90

Pages Group
Output Condition
4-20mA
Output
Ranges/Limits
Graphical View
4-20mA dc
Output and
failsafe levels
Transfer Function
and cutoff mode
Upgrade
Options
Page 78
Parameter
NAMUR
Selection
AO Alrm type
Pres damp or
Temp Damp or Flo
Damp or Totalizer
damp
Loop current
mode
Transfer
Function
Image
Image
Image
Available Option
Device Id
Enter License key
SMV800 Series HART/DE Option User's Manual
Description
Select to enable or disable the Namur option for the
output. Refer to 4-20mA dc output and failsafe leveI
mageto see the effect on output signal.
Analog output alarm type – defines how the analog
output will respond when the field device detects that
the analog output may not be tracking the associated
field device variable. Note that the digital value
representation may not be determinate
Damping value of mapped process variables to the
analog output
Enable: enables loop current mode (analog output
will operate as a 4 to 20 mA signal consistent with
the transmitter output).
Disable: disables loop current mode (analog output
will be fixed to value set by user)
Ranges and limits will be graphically shown (note
that this is a static image)
4-20 mA dc Output and failsafe levels will be
graphically shown (note that this is a static image)
Transfer Function and cutoff mode will be graphically
shown (note that this is a static image)
Displays any purchased Upgrade Options
The Device ID portion of the device serial number or
HART Address (this ID is needed when ordering
upgrade options)
When an upgrade option is purchased, a License
Key will be provided. Enter the License Key here to
enable the option
Revision 6.0