Configuration Tools And Interfaces; Overview; Pre-Requisites; Application Design, Installation, Startup, And Operation - Honeywell SmartLine STT700 HART User Manual

3 Configuration Tools and Interfaces

3.1 Overview

This section describes the tools and interfaces involved in configuring a new STT700 SmartLine
Temperature Transmitter for HART or DE communication operation. The information in this section
also applies to adjusting the configuration of a transmitter that has been in operation and updating one
that is currently in operation.

3.2 Pre-requisites

The information and procedures in this manual are based on the assumption that personnel performing
configuration and calibration tasks are fully qualified and knowledgeable in the use of the Honeywell
MC Toolkit MCT404. The reference to MC Toolkit, Toolkit and MCT404 are used interchangeably as
MCT404 is the model name for the Honeywell MC Toolkit product.
Furthermore, we assume that the reader is intimately familiar with the STT700 SmartLine
Temperature Transmitter and thoroughly experienced in the type of process application targeted for
transmitter deployment. Therefore, detailed procedures are supplied only in so far as necessary to
ensure satisfactory completion of configuration tasks.

3.3 Application Design, Installation, Startup, and Operation

The STT700 SmartLine Temperature Transmitters User's Manual, document number 34-TT-25-17,
provides the details for Application Design, Installation and Startup, Operation, Configuration tools,
Maintenance and Calibration.

3.3.1 Organization

This information in this section is arranged in the following sequence:

MC Toolkit participation in STT700 transmitter setup and configuration:
1. Physical circuit connections
2. Application components
3. Configuration for analog, DE and HART operation

STT700 transmitter
1. Health indications
2. Ability to be configured and operate in a process system
Revision 1
STT700 Series HART/DE Option User's Manual
Page 15