Procedure
Step 1.
Install the 7mm drive backplanes.
Figure 33. Installing 7mm drive backplane
a.
Slide the lower backplane into the drive cage; then, fasten the screw to secure the lower
backplane to the drive cage.
b.
Align the upper backplane with the lower backplane; then, fasten the two screws to secure
the upper backplane to the lower backplane.
Step 2.
Install the 7mm drive cage bracket.
Figure 34. Installing 7mm drive cage bracket
a.
Align the 7mm drive cage bracket with the drive cage and slide it away from the connectors.
b.
Secure the 7mm drive cage bracket with a screw.
Step 3.
Install the 7mm drive cage.
ThinkSystem SR860 V3 User Guide
84