a.
Disconnect the PCIe riser 1 cables from the system board assembly. See
routing" on page 424
b.
Grasp and lift the PCIe riser to remove it from the chassis; then, disconnect the power cable
from the PCIe riser.
c.
Record the cable connections and disconnect all internal cables from the PCIe adapters.
Remove PCIe riser 3
Procedure
Step 1.
Make preparation for the task.
a.
Remove the front top cover. See
b.
Remove the rear top cover. See
c.
Remove the crossbar. See
Step 2.
Remove PCIe riser 2.
Figure 125. Removing PCIe riser 2
a.
Disconnect the PCIe riser 2 assembly cables from the system board assembly. See
2 cable routing" on page 426
b.
Grasp and lift the PCIe riser to remove it from the chassis.
c.
Record the cable connections and disconnect all internal cables from the PCIe adapters.
Step 3.
If a 7mm drive cage is installed in PCIe riser 3, remove PCIe riser 1 and disconnect the 7mm drive
cables.
for more information on the internal cable routing.
"Remove the front top cover" on page
"Remove the rear top cover" on page
"Remove the crossbar" on page
for more information on the internal cable routing.
"PCIe riser 1 cable
272.
274.
109.
.
Chapter 5
Hardware replacement procedures
"PCIe riser
177