Lenovo ThinkSystem SR860 V3 User Manual page 194

remove all electrical current from the device, ensure that all power cords are disconnected from the
power source.
Attention:
• Read "Installation Guidelines" on page 43
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
Notes:
• For a list of the supported PCIe adapters, see
• Ensure that you observe the installation rules and sequence order in
rules and order" on page
• For instructions on how to remove and install a double-wide GPU adapter, see
and double-wide GPU adapter replacement" on page
• For more details on the different types of risers, see
Depending on your configuration, follow the corresponding procedures below for proper installation
procedure.
• See "Install PCIe adapter to two slot FH riser" on page 184
– x8/x8 PCIe G4 Riser 1/3 FHHL
– 7mm/x8/x8 PCIe G4 Riser 3 FHHL
• See "Install PCIe adapter to six slot FH riser" on page 185
– 3 x16 & 3 x8 PCIe G4 Riser 1/3 FHFL
– 2 x16 & 3 x8 + 7mm PCIe G4 Riser 3 FHFL
– 4 x16 & 1 x8 PCIe G5 Riser 1/3 FHFL
– 3 x16 & 1 x8 + 7mm PCIe G5 Riser 3 FHFL
• See "Install PCIe adapter to six slot HH riser" on page 186
– 6 x8 PCIe G4 Riser 2 HHHL
– 6 x8 PCIe G5 Riser 2 HHHL
Install PCIe adapter to two slot FH riser
Procedure
Step 1. If a filler has been installed to the slot on the PCIe riser, remove the screw that secures it and
remove the filler.
Step 2. Install the PCIe adapter.
ThinkSystem SR860 V3 User Guide
184
and "Safety inspection checklist" on page 44
58.
https://serverproven.lenovo.com
55.
"PCIe riser and adapter installation
136.
"Rear view" on page 20.
for the following risers:
for the following risers:
for the following risers:
to ensure that you
.
"GPU adapter link bridge