3. Remove the crossbar. See
4. Remove all the PCIe risers. See
5. Remove the rear air baffle. See
Step 2.
Remove the PHM from the system board assembly.
Notes:
• Do not touch the contacts on the bottom of the processor.
• Keep the processor socket clean from any object to prevent possible damages.
Figure 192. Removing a 3U standard PHM
ThinkSystem SR860 V3 User Guide
240
"Remove the crossbar" on page
"Remove the PCIe riser" on page
"Remove the rear air baffle" on page
109.
174.
94.