Table of Contents
Advertisement
Figure 173. Installing PCIe riser extender to FH PCIe riser
a.
Align the screw holes on the PCIe riser extender with the screw holes in the PCIe riser cage.
b.
Install six screws to secure the PCIe riser extender.
Install a PCIe riser extender to six slot HH riser
Note: A Gen 4 riser is used as an example for illustration. The replacement procedure for a Gen 5 riser is
similar.
Procedure
Step 1.
If a filler is installed, remove it.
Figure 174. Removing filler from FH PCIe riser
.
Chapter 5
Hardware replacement procedures
217
Advertisement
Chapters
Table of Contents
