Lenovo ThinkSystem SR860 V3 User Manual page 76

R006
CAUTION:
Do not place any object on top of a rack-mounted
device unless that rack-mounted device is intended
for use as a shelf.
Attention:
• Read "Installation Guidelines" on page 43
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
Procedure
Step 1. Lift the server and place it on a table. Two lifting options are available:
For two-person lift, remove the following
components beforehand:
• All the power supply units
• All the storage drives
• Both front and rear covers
Lift point
1
Step 2. Remove the inner rails from the intermediate rails.
ThinkSystem SR860 V3 User Guide
66
S037
CAUTION:
The weight of this part or unit is more than 55 kg
(121.2 lb). It takes specially trained persons, a lifting
device, or both to safely lift this part or unit.
and "Safety inspection checklist" on page 44
58.
Otherwise, lift the server with three people or a lifting device.
CAUTION:
Make sure to lift the server by holding the lift points.
to ensure that you