Lenovo ThinkSystem SR860 V3 User Manual page 82

Attention: Slide the server all the way out and all the way back in to make sure the rails are working
smoothly.
Step 8. Reinstall all the components that were removed previously.
Step 9. (Optional) Secure the server to the rack.
Rear
Hook latch
1
Note: Use either flat-head, hex socket, or Phillips driver for the following instruction.
Insert and tighten an M5 screw along with a washer to the hole below each hook latch.
Open the rack release latches.
Tighten the captive screws clockwise with a Phillips screwdriver.
After you finish
Complete the parts replacement. See
ThinkSystem SR860 V3 User Guide
72
Front
"Complete the parts replacement" on page 281.