Figure 131. Installing PCIe adapter to riser
a.
Align the adapter with the connector on the PCIe riser; then, carefully press the PCIe
adapter straight into the slot until it is securely seated and its bracket also is secured.
b.
Make sure the latch clicks in the locked position.
c.
Secure the adapter with a screw.
Install PCIe adapter to six slot FH riser
Note: A Gen 4 riser is used as an example for illustration. The replacement procedure for a Gen 5 riser is
similar.
Procedure
Step 1.
If a filler has been installed to the slot on the PCIe riser, remove the screw that secures it and
remove the filler.
Step 2.
Install the PCIe adapter.
.
Chapter 5
Hardware replacement procedures
185