One AnyBay backplane combinations
•
"1 x AnyBay backplane" on page 314
•
"1 x AnyBay and 1 x SAS/SATA backplane" on page 321
•
"1 x AnyBay + 2 x SAS/SATA backplanes" on page 325
•
"1 x AnyBay + 3 x SAS/SATA backplanes" on page 331
•
"1 x AnyBay + 4 x SAS/SATA backplanes" on page 339
•
"1 x AnyBay + 5 x SAS/SATA backplanes" on page 347
Two AnyBay backplane combinations
•
"2 x AnyBay backplanes" on page 353
•
"2 x AnyBay + 1 x SAS/SATA backplane" on page 358
•
"2 x AnyBay + 2 x SAS/SATA backplanes" on page 364
•
"2 x AnyBay + 3 x SAS/SATA backplanes" on page 372
•
"2 x AnyBay + 4 x SAS/SATA backplanes" on page 380
Three AnyBay backplane combinations
•
"3 x AnyBay backplanes" on page 386
•
"3 x AnyBay + 1 x SAS/SATA backplane" on page 393
•
"3 x AnyBay + 2 x SAS/SATA backplanes" on page 401
•
"3 x AnyBay + 3 x SAS/SATA backplanes" on page 409
1 x AnyBay backplane
Use this section to understand the signal cable routing for one AnyBay backplane.
Notes:
• Ensure that you observe the installation rules and sequence order in
rules and order" on page 55
• For more information on the power cable routing, see
page
292.
• Depending on your configuration, the RAID/HBA adapter will be installed in different riser locations.
• Connections between connectors;
• When routing the cables, ensure that all cables are routed appropriately through the cable guides.
This configuration contains the following storage controller combinations:
•
"No RAID/HBA adapters" on page 314
•
"8i RAID/HBA adapter" on page 316
•
"16i RAID/HBA adapter" on page 318
•
"32i RAID adapter" on page 320
No RAID/HBA adapters
Note: The AnyBay backplanes are used as pure NVMe backplanes when no RAID/HBA adapters are
installed.
ThinkSystem SR860 V3 User Guide
314
and
"Drive backplane installation rules and order" on page
↔
↔
↔
,
,
1
1
2
2
3
"PCIe riser and adapter installation
"2.5-inch drive backplane power cable routing" on
↔
, ...
3
n
n
54.