Figure 66. Disengaging PCIe riser
a.
Slightly lift the PCIe riser out of the chassis.
b.
Lift the kickstand(s) outward.
c.
Place the PCIe riser on top of the kickstand(s).
Step 4.
Repeat
Step 3 on page 110
Step 5.
Remove the crossbar.
Figure 67. Removing crossbar
a.
Rotate the crossbar towards the rear of the server.
b.
Grasp and lift the crossbar to remove it from the chassis.
After you finish
1. Install a replacement unit. See
to disengage the other two PCIe risers.
"Install the crossbar" on page
112.
.
Chapter 5
Hardware replacement procedures
111