Show Mode - Compaq AA-Q88CE-TE System Manager's Manual

SHOW MODE

SHOW MODE
Displays the current RTR mode.
Format
SHOW MODE
Command Qualifiers
/CLUSTER
/NODE[=node-list]
/OUTPUT[=file-spec]
Description
The SHOW MODE
nogroup (system) mode, a null group name is displayed.
further information about modes.
Qualifiers
/CLUSTER
/NOCLUSTER (D)
Specifies that the command is executed on all the nodes in the cluster.
If neither
nodes specified by the latest
command has been entered then the command is executed only on the node where
the command was issued.
Note: In environments that do not support clustering, use of the /CLUSTER
qualifier will cause the relevant command to be executed on the local node only.
/NODE[=node-list]
/NODE=default-node-list (D)
Specifies that the command is executed on all nodes specified in
node-list
command was issued.
/OUTPUT[=file-spec]
/OUTPUT=stdout (D)
Specifies that the resulting information is written to the file
/OUTPUT
Related Commands
•
SET MODE
6–148 RTR Command Line Interface
command shows the currently running user group for RTR. For
/NODE nor /CLUSTER is specified then the command is executed on the
SET ENVIRONMENT
is omitted then the command is executed only on the node where the
or file-spec is omitted then the standard or default output is used.
Defaults
/NOCLUSTER
/NODE=default-node-list
/OUTPUT=stdout
command. If no
command for
SET MODE
SET ENVIRONMENT
. If
node-list
. If
file-spec