Key-Range States - Compaq AA-Q88CE-TE System Manager's Manual

Note: In environments that do not support clustering, use of the /CLUSTER
qualifier will cause the relevant command to be executed on the local node only.
/FRONTEND
/NOFRONTEND (D)
Specifies that information should be listed for transactions in a frontend node. If
none of /BACKEND, /FRONTEND or /ROUTER are specified, then information
for all of them are displayed. If either /BACKEND or /ROUTER are specified,
then the default (/NOFRONTEND) inhibits display of frontend transaction
information.
/IDENTIFICATION=process-id
/NOIDENTIFICATION (D)
Specifies the PID of the process for which information is displayed. The default
(/NOIDENTIFICATION) displays information for all processes.
/FACILITY
/FACILITY="*" (D)
Specifies the facility name for which information should be displayed.
By default, information is displayed for all Facilities.
/FULL
/NOFULL (D)
Produces a detailed listing of transaction information.
/NODE[=node-list]
/NODE=default-node-list (D)
Specifies that the command is executed on all nodes specified in
is omitted then the command is executed only on the node where the
node-list
command was issued.
/OUTPUT[=file-spec]
/OUTPUT=stdout (D)
Specifies that the resulting information is written to the file
or is omitted then the standard or default output is used.
/OUTPUT file-spec
/ROUTER
/NOROUTER (D)
Specifies that information should be listed for transactions in a router node. If
none of /BACKEND, /FRONTEND or /ROUTER are specified, then information
for all of them are displayed. If either /BACKEND or /FRONTEND are specified,
then the default (/NOROUTER) inhibits display of router transaction information.
The ''Key-Range-State'' field for SHOW TRANSACTION /ROUTER /FULL shows
the following states:
Table 6–25 Key-Range States
State
locl_rec
shad_rec
Meaning
Local recovery in progress
Shadow recovery in progress
SHOW TRANSACTION
node-list
file-spec
(continued on next page)
RTR Command Line Interface 6–169
. If
. If