Show Channel - Compaq AA-Q88CE-TE System Manager's Manual

SHOW CHANNEL

Show the names and state of channels that have been opened using the CLI API.
Format
SHOW CHANNEL [channel-name]
Command Qualifiers
/ALL_WINDOWS
/CLUSTER
/NODE=node-list
/OUTPUT[=file-spec]
Description
The SHOW CHANNEL
name and owner process-id for channels opened using the CLI API.
Parameters
channel-name
Specifies the name of the channel to be displayed.
cards. If
or virtual terminal) are displayed.
Qualifiers
/ALL_WINDOWS
/NOALL_WINDOWS
Specifies that channels opened in all windows (terminals or virtual terminals) are
shown.
/CLUSTER
/NOCLUSTER (D)
Specifies that the command is executed on all the nodes in the cluster.
If neither
nodes specified by the latest
command has been entered then the command is executed only on the node where
the command was issued.
Note: In environments that do not support clustering, use of the /CLUSTER
qualifier will cause the relevant command to be executed on the local node only.
/NODE[=node-list]
/NODE=default-node-list (D)
Specifies that the command is executed on all nodes specified in
node-list
command was issued.
/OUTPUT[=file-spec]
/OUTPUT=stdout (D)
Specifies that the resulting information is written to the file
/OUTPUT
command shows the channel type (client or server), the channel
is omitted all declared channels for this window (terminal
channel-name
nor is specified then the command is executed on the
/NODE /CLUSTER
SET ENVIRONMENT
is omitted then the command is executed only on the node where the
or is omitted then the standard or default output is used.
file-spec
Defaults
/NOALL_WINDOWS
/NOCLUSTER
/NODE=default-node-list
/OUTPUT=stdout
channel-name
command. If no
RTR Command Line Interface 6–129
SHOW CHANNEL
can contain wild
SET ENVIRONMENT
. If
node-list
. If
file-spec