SHOW ENVIRONMENT
Shows the default nodes used for remote command execution.
Format
SHOW ENVIRONMENT
Description
The
SHOW ENVIRONMENT
remote command execution.
Related Commands
•
SET ENVIRONMENT
Examples
RTR> SET ENVIRONMENT/NODE=(FE2,FE3)
RTR> SHOW ENVIRONMENT
%RTR-S-COMARESEN, commands sent by default to node FE2
%RTR-S-COMARESEN, commands sent by default to node FE3
Set the command environment so that subsequent commands will be executed
1
on nodes FE2 and FE3.
Show which nodes are selected.
2
The RTR-S-COMARESEN message is displayed for each selected node.
3
command shows which nodes are used by default for
1
2
SHOW ENVIRONMENT
3
RTR Command Line Interface 6–135