Call Rtr_Get_Tid - Compaq AA-Q88CE-TE System Manager's Manual

CALL RTR_GET_TID

If neither
nodes specified by the latest
command has been entered then the command is executed only on the node where
the command was issued.
Note: In environments that do not support clustering, use of the /CLUSTER
qualifier will cause the relevant command to be executed on the local node only.
/NODE[=node-list]
/NODE=default-node-list (D)
Specifies that the command is executed on all nodes specified in
node-list
command was issued.
/OUTPUT[=file-spec]
/OUTPUT=stdout (D)
Specifies that the resulting information is written to the file
/OUTPUT
Examples
This command shows the transaction id active on channel ''CLIENT1''.
RTR> CALL RTR_GET_TID/CHANNEL=CLIENT1
%RTR-S-OK, normal successful completion
tid:
6–14 RTR Command Line Interface
nor is specified then the command is executed on the
/NODE /CLUSTER
SET ENVIRONMENT
is omitted then the command is executed only on the node where the
or is omitted then the standard or default output is used.
file-spec
e100b810,0,0,0,0,3bc5,6eb02001
command. If no SET ENVIRONMENT
node-list
file-spec
. If
. If