Call Rtr_Close_Channel - Compaq AA-Q88CE-TE System Manager's Manual

/CLUSTER
/NOCLUSTER (D)
Specifies that the command is executed on all the nodes in the cluster.
If neither
nodes specified by the latest
command has been entered then the command is executed only on the node where
the command was issued.
Note: In environments that do not support clustering, use of the /CLUSTER
qualifier will cause the relevant command to be executed on the local node only.
/IMMEDIATE
/IMMEDIATE=RTR$DEFAULT_CHANNEL
Specifies the closing of a channel immediately without sending of a transaction
acknowledgement.
Use /IMMEDIATE=RTR_F_CLO_IMMEDIATE to close the channel and recover
any accepted transactions on this channel to an alternate server channel.
/NODE[=node-list]
/NODE=default-node-list (D)
Specifies that the command is executed on all nodes specified in
node-list
command was issued.
/OUTPUT[=file-spec]
/OUTPUT=stdout (D)
Specifies that the resulting information is written to the file
/OUTPUT
Examples
This command closes the RTR$DEFAULT_CHANNEL.
RTR> CALL RTR_CLOSE_CHANNEL
%RTR-S-OK, Normal successful completion
This command closes the channel named ''client1''.
RTR> CALL RTR_CLOSE_CHANNEL/CHANNEL_NAME=CLIENT1
%RTR-S-OK, Normal successful completion
nor is specified then the command is executed on the
/NODE /CLUSTER
SET ENVIRONMENT
is omitted then the command is executed only on the node where the
or is omitted then the standard or default output is used.
file-spec

CALL RTR_CLOSE_CHANNEL

command. If no
SET ENVIRONMENT
node-list
file-spec
RTR Command Line Interface 6–11
. If
. If