Table of Contents
Advertisement
Purpose of this Manual
This manual describes how to configure, manage and monitor the operation of
Reliable Transaction Router (RTR) using the RTR Command Line Interface (CLI).
Intended Audience
The System Manager's Manual is intended for persons who perform system
management functions to configure, test, monitor and maintain RTR applications.
The reader is assumed to be familiar with their operating system, but not
necessarily experienced with RTR operations.
New users of RTR are encouraged to read the first chapters of the Application
Programmer's Reference Manual for a overall description of RTR.
Structure of Document
The manual contains the following chapters and appendices:
•
Chapter 1 is an introduction to the RTR Command Line Interface (CLI) and
tells you how to use local and remote commands and command procedures.
•
Chapter 2 explains how to start and configure RTR.
•
Chapter 3 describes RTR's Partition Management.
•
Chapter 4 gives an overview of RTR's Transaction Management tools.
•
Chapter 5 describes how the RTR monitor is used to continuously observe the
performance and operation of RTR and applications using RTR.
•
Chapter 6 describes how to use the CLI interface to RTR API calls and
contains a complete description of all RTR commands, listed alphabetically.
•
Appendix A tells you how to create your own monitor pictures for special
monitoring needs.
•
Appendix B describes server shadowing and recovery.
•
Appendix C describes how to use RTR with XA and ORACLE.
•
Appendix D contains a list of all the error messages that can be returned by
the RTR CLI.
•
Appendix E contains a list of all messages that RTR can write to the RTR log.
Preface
xi
Advertisement
Table of Contents
