Server Flags - Compaq AA-Q88CE-TE System Manager's Manual

SHOW SERVER
Table 6–23 Server Flags
FLAG
BEC
EXA
EXP
NCC
NSB
SHD
SRV
TRC
Qualifiers
/CLUSTER
/NOCLUSTER (D)
Specifies that the command is executed on all the nodes in the cluster.
If neither
nodes specified by the latest
command has been entered then the command is executed only on the node where
the command was issued.
Note: In environments that do not support clustering, use of the /CLUSTER
qualifier will cause the relevant command to be executed on the local node only.
/IDENTIFICATION=process-id
/NOIDENTIFICATION (D)
Specifies the PID of the process for which information should be displayed. The
default (/NOIDENTIFICATION) displays information for all servers.
/FACILITY
/FACILITY="*" (D)
Specifies the facility name for which information should be displayed.
By default, information is displayed for all Facilities.
/FULL
/NOFULL (D)
Specifies a detailed listing of server information.
/NODE[=node-list]
/NODE=default-node-list (D)
Specifies that the command is executed on all nodes specified in
node-list
command was issued.
/OUTPUT[=file-spec]
/OUTPUT=stdout (D)
Specifies that the resulting information is written to the file
/OUTPUT
6–166 RTR Command Line Interface
Meaning
Backend Call-out
Explicit Accept
Explicit Prepare
No Concurrent
No Standby
Shadow
Server
Router Call-out
nor is specified then the command is executed on the
/NODE /CLUSTER
SET ENVIRONMENT
is omitted then the command is executed only on the node where the
or is omitted then the standard or default output is used.
file-spec
command. If no
SET ENVIRONMENT
node-list
file-spec
. If
. If