Call Rtr_Get_Tid; Parameters For Rtr_Get_Tid - Compaq AA-Q88CE-TE System Manager's Manual

CALL RTR_GET_TID

The CALL RTR_GET_TID command causes a command server to execute the
rtr_get_tid( )
Format
CALL RTR_GET_TID
Command Qualifiers
/CHANNEL_NAME=channel-name
/CLUSTER
/NODE[=node-list]
/OUTPUT[=file-spec]
Description
The CALL RTR_GET_TID command causes a command server to call to the
rtr_get_tid( )
The transaction id returned from the call is converted to its textual representation
and displayed.
The rtr_get_tid( )
Reference Manual.
The prototype of
void*
Table 6–6 shows the correspondence between values you supply on the command
line and the C language parameter values produced and used for the call.
Table 6–6 Parameters for rtr_get_tid
C Parameter Name Parameter Value
channel
flags RTR_NO_FLAGS
Qualifiers
/CHANNEL_NAME=channel_name
/CHANNEL_NAME=RTR$DEFAULT_CHANNEL
Specifies the channel for which the operation is to be performed.
The command server uses a combination of the channel_name and the window
from which the call was issued to uniquely identify which channel to use.
The default channel name is RTR$DEFAULT_CHANNEL.
/CLUSTER
/NOCLUSTER (D)
Specifies that the command is executed on all the nodes in the cluster.
routine and to display the returned status.
routine using values supplied on the command line.
routine itself is described in Application Programmer's
rtr_get_tid( )
rtr_status_t rtr_get_tid (
rtr_channel_t
rtr_tid_flag_t
ptid
) ;
Defaults
/CHANNEL_NAME=RTR$DEFAULT_CHANNEL
/NOCLUSTER
/NODE=default-node-list
/OUTPUT=stdout
is:
channel,
flags,
Command Line Specification
/CHANNEL_NAME=name
[none] [D]
RTR Command Line Interface 6–13
CALL RTR_GET_TID