Delete Partition - Compaq AA-Q88CE-TE System Manager's Manual

DELETE PARTITION

Delete an RTR PARTITION.
Format
DELETE PARTITION
Command Qualifiers
/CLUSTER
/NODE=node-list
/OUTPUT[=file-spec]
/FACILITY
Description
The DELETE PARTITION
where the command is issued.
Parameters
PARTITION_name
The name of the partition to delete.
The parameter
partition_name
Qualifiers
/CLUSTER
/NOCLUSTER (D)
Specifies that the command is executed on all the nodes in the cluster.
If neither
nodes specified by the latest
command has been entered then the command is executed only on the node where
the command was issued.
Note: In environments that do not support clustering, use of the /CLUSTER
qualifier will cause the relevant command to be executed on the local node only.
/FACILITY
Specifies the name of the facility from which the partition is being deleted.
/NODE[=node-list]
/NODE=default-node-list (D)
Specifies that the command is executed on all nodes specified in
node-list
command was issued.
/OUTPUT[=file-spec]
/OUTPUT=stdout (D)
Specifies that the resulting information is written to the file
/OUTPUT
PARTITION_name
command removes the specified partition on the node
partition_name
<or as
facility_name:partition_name
nor is specified then the command is executed on the
/NODE /CLUSTER
SET ENVIRONMENT
is omitted then the command is executed only on the node where the
or file-spec is omitted then the standard or default output is used.
Defaults
/NOCLUSTER
/NODE=default-node-list
/OUTPUT=stdout
must be supplied. It may be specified as
command. If no
RTR Command Line Interface 6–65
DELETE PARTITION
.
SET ENVIRONMENT
node-list . If
. If
file-spec