Stop Rtr - Compaq AA-Q88CE-TE System Manager's Manual

STOP RTR

Stop RTR on one or more nodes.
Format
STOP RTR
Command Qualifiers
/ABORT
/CLUSTER
/NODE[=node-list]
/OUTPUT[=file-spec]
Description
The STOP RTR
Alternatively, RTR can be stopped in an abrupt manner (/ABORT), and any
applications using RTR are forced to exit.
Qualifiers
/ABORT
Specifying /ABORT causes RTR to stop, regardless of the state of any RTR user
applications. Applications using RTR are forced to exit.
This qualifier supersedes the /NOCONFIRM of earlier versions of RTR.
/CLUSTER
/NOCLUSTER (D)
Specifies that the command is executed on all the nodes in the cluster.
If neither
nodes specified by the latest
command has been entered then the command is executed only on the node where
the command was issued.
Note: In environments that do not support clustering, use of the /CLUSTER
qualifier will cause the relevant command to be executed on the local node only.
/NODE[=node-list]
/NODE=default-node-list (D)
Specifies that the command is executed on all nodes specified in
node-list
command was issued.
Defaults
/NOABORT
/NOCLUSTER
/NODE=default-node-list
/OUTPUT=stdout
command stops RTR in an orderly manner.
nor is specified then the command is executed on the
/NODE /CLUSTER
SET ENVIRONMENT
is omitted then the command is executed only on the node where the
Note
command. If no
RTR Command Line Interface 6–177
STOP RTR
SET ENVIRONMENT
. If
node-list