Extend Configuration Example - Compaq AA-Q88CE-TE System Manager's Manual

Starting and Setting Up RTR
2.4 Changing a Facility
Figure 2–2 Extend Configuration Example
F R O N T E N D S
F E 1
F E 2
F E 3
F E 4
All backend nodes must be informed when router configurations are changed.
Because TR3 will be a router for the FE3 and FE4 frontends, these nodes must
also be informed of its presence. Likewise, TR3 must be informed about FE3 and
FE4.
Example 2–4 shows the
2–6 Starting and Setting Up RTR
R O U T E R S
T R 1
T R 2
T R 3
command used for this reconfiguration.
extend facility
B A C K E N D S
B E 1
B E 2
B E 3
SMM_CONFI G _EX_EXT 02−99