Create Facility - Compaq AA-Q88CE-TE System Manager's Manual

CREATE FACILITY

Create an RTR facility and ready it for transaction traffic.
Format
CREATE FACILITY
Command Qualifiers
/ALL_ROLES=node-list
/BACKEND=backend-list
/BALANCE
/CALL_OUT=role-list
/CLUSTER
/FRONTEND=frontend-list
/NODE[=node-list]
/OUTPUT[=file-spec]
/REPLY_CHECKSUM
/RESOURCE_MANAGER=resource-list
/ROUTER=router-list
Description
The
CREATE FACILITY
and readies it for transaction traffic (that is, establishes links to other the
participating nodes).
The command must be issued on all participating nodes before any application
programs using the facility are started.
Router nodes must have all backend nodes defined and Backend nodes
must have all router nodes defined.
Routers need only be defined with the frontends that they can connect to.
Frontends need only be defined with the routers they can connect to.
Parameters
facility_name
Specifies the name of the facility to be created.
Any application program which uses this facility must specify the same name
when it calls
Facility names can contain up to thirty-one characters. Letters, numbers and
underline characters are all valid, but the first character of a facility name must
be a letter.
Facility names are not case sensitive.
The default value for
The
/ROUTER
specified.
[facility_name]
Defaults
/NOALL_ROLES
/NOBACKEND
/NOBALANCE
/NOCALL_OUT
/NOCLUSTER
/NOFRONTEND
/NODE=default-node-list
/OUTPUT=stdout
NOREPLY_CHECKSUM
/NOROUTER
command configures (defines on a node) an RTR facility
.
rtr_open_channel( )
facility_name
qualifier, and at least one of
CREATE FACILITY
Note
is
RTR$DEFAULT_FACILITY
or
/FRONTEND /BACKEND
RTR Command Line Interface 6–47
.
must be