Show Journal - Compaq AA-Q88CE-TE System Manager's Manual

SHOW JOURNAL

SHOW JOURNAL
Display information about current RTR journal files.
Format
SHOW JOURNAL
Command Qualifiers
/CLUSTER
/FILENAMES
/FULL
/NODE[=node-list]
/OUTPUT[=file-spec]
Description
The
SHOW JOURNAL
and (optionally) the maximum and allocated number of blocks for each journal
file and the journal file name.
Qualifiers
/CLUSTER
/NOCLUSTER (D)
Specifies that the command is executed on all the nodes in the cluster.
If neither
nodes specified by the latest
command has been entered then the command is executed only on the node where
the command was issued.
Note: In environments that do not support clustering, use of the /CLUSTER
qualifier will cause the relevant command to be executed on the local node only.
/FILENAMES
/NOFILENAMES (D)
adds the journal filenames to the display.
/FILE
/FULL
/NOFULL (D)
/FULL adds to the display the maximum and allocated number of blocks for each
journal file.
/NODE[=node-list]
/NODE=default-node-list (D)
Specifies that the command is executed on all nodes specified in
node-list
command was issued.
/OUTPUT[=file-spec]
/OUTPUT=stdout (D)
Specifies that the resulting information is written to the file
/OUTPUT
6–140 RTR Command Line Interface
command shows the disks where the RTR journal files reside,
nor is specified then the command is executed on the
/NODE /CLUSTER
SET ENVIRONMENT
is omitted then the command is executed only on the node where the
or is omitted then the standard or default output is used.
file-spec
Defaults
/NOCLUSTER
/NOFILENAMES
/NOFULL
/NODE=default-node-list
/OUTPUT=stdout
command. If no SET ENVIRONMENT
. If
node-list
. If
file-spec