Call Rtr_Broadcast_Event; Parameters For Rtr_Broadcast_Event - Compaq AA-Q88CE-TE System Manager's Manual

Table 6–2 Parameters for rtr_broadcast_event
C Parameter Name C Parameter Value
channel
flags RTR_NO_FLAGS
pmsg, msglen,
1
msgfmt
evtnum 42
rcpspc "workstat*"
1
The actual values used for
command line parameter.
The command server uses message data specified as command line parameter
values to generate a record containing the message data (for the
the message length (for the
the
msgfmt
Qualifiers
/CHANNEL_NAME=channel-name
/CHANNEL_NAME=RTR$DEFAULT_CHANNEL
Specifies the channel for which the operation is to be performed.
The command server uses a combination of the
from which the call was issued to uniquely identify which channel to use.
channel_name
The default for channel-name is RTR$DEFAULT_CHANNEL.
/CLUSTER
/NOCLUSTER (D)
Specifies that the command is executed on all the nodes in the cluster.
If neither
nodes specified by the latest
command has been entered then the command is executed only on the node where
the command was issued.
Note: In environments that do not support clustering, use of the /CLUSTER
qualifier will cause the relevant command to be executed on the local node only.
/EVENT_NUMBER=user-event-number
The user event number associated with this broadcast, in the range of
RTR_EVTNUM_USERBASE to RTR_EVTNUM_USERMAX (i.e. 0 to 250).
/FORMAT[=fmt-string]
/NOFORMAT (D)
Specifies that a format string should be sent with this message.
If /FORMAT is specified without
format string. The format string is generated using the parameters given for
the qualifiers /SIGNED, /UNSIGNED, /STRING and /LENGTH. The following
table shows permitted values for these qualifiers when using /FORMAT without
fmt-string
pmsg msglen msgfmt
, and
msglen
parameter).
is not case sensitive.
/NODE nor /CLUSTER is specified then the command is executed on the
SET ENVIRONMENT
.

CALL RTR_BROADCAST_EVENT

Command Line Specification
/CHANNEL_NAME=name
[none] [D]
[message definition parameter list with positional
qualifiers. ]
/EVENT_NUMBER=42
/RECIPIENT_SPEC="workstat*"
are based upon the message definition you specify as a
parameter), and a record type description (for
channel_name
command. If no
, RTR automatically generates a
fmt-string
RTR Command Line Interface 6–7
parameter),
pmsg
and the window
SET ENVIRONMENT